If You Have a Flat Tire First, make sure you are completely off the road, away from traffic. Second, stop your engine and turn on the emergency lights. Third, put on the parking brake firmly. Fourth, get everyone out of the car on the side, away from traffic. Now, follow these instructions: 1. Get the toll (jack, crowbar, and lug wrench) and the spare tire out of the trunk. 2. Block the whell opposite the flat tire to keep the car from rolling when it is jacked up. 3. Remove the hubcap with crowbar. 4. Loosen all the lug nuts with the lug wrench. 5. Place the jack under the car in the correct position. 6. Raise the car just high enough to put on the correct spare tire. 7. Remove the lug nuts and take off the punctured tire. Put on the new tire. 8. Put the lug nuts back on and tighten them by hand. 9. Lower the car completely and take away the jack. Tighten the lug nuts with the lug wrench. 10. Put the hubcap back on. When does the hubcap go back on?

Question

Jawaban yang tepat adalah "The hubcap goes back on after the lug nuts are tightened with the lug wrench".

Soal menanyakan kapan penutup ban/roda dipasang kembali.

Jawaban dapat ditemukan pada langkah no 9-10, terutama kalimat:

9. Lower the car completely and take away the jack. Tighten the lug nuts with the lug wrench (Turunkan mobil sepenuhnya dan lepaskan dongkrak. Kencangkan mur roda dengan kunci pas).
10. Put the hubcap back on (Pasang kembali penutup roda).

Berdasarkan penjelasan tersebut dapat disimpulkan bahwa penutup ban/roda dipasang kembali setelah mur roda dikencangkan dengan kunci pas (the hubcap goes back on after the lug nuts are tightened with the lug wrench).

Jadi, jawaban yang tepat adalah "The hubcap goes back on after the lug nuts are tightened with the lug wrench".

Mau pemahaman lebih dalam untuk soal ini?

Pertanyaan serupa