SMA Bahasa Inggris: Pertanyaan, Jawaban, Latihan Soal & Pembahasan

Choose the correct answer by crossing A, B, C, D, or E!

This text Is for questions 4 to 6.

    You can connect a USB device to your computer by inserting its USB plug. The first time you plug a USB device into a particular USB port on your computer, Windows automatically installs a driver for that device. After the driver has been installed, you can disconnect and reconnect the device without performing any additional steps. Before disconnecting a USB storage device, make sure your computer has finished transferring data to that device. Click the Safely Remove Hardware and Eject Media icon in the Windows notification area to remove the device before disconnecting.

4. How do we remove the USB device from the computer

Choose the correct answer by crossing A, B, C, D, or E!

The very first thing you must do if you have just bought a tablet is charging the battery. Here are the steps.

1. Assemble the power adapter's two pieces, and then plug the USB cable into the adapter. They snap together only one way.
2. Plug the adapter into the wall.
3. Attach the USB cable to the tablet. Look for the tiny connector on the tablet's bottom edge; typically, at the center. The connector might instead be located on the tablet's side.
4. Upon success, a large "Battery Charging" type of icon might appear on the tablet's touchscreen. This icon lets you know that the tablet is functioning properly.

Source: Android Tablets for Dummies

How do we know that the device functions properly?

Choose the correct answer by crossing A, B, C, D, or E!

This text Is for questions 4 to 6.

    You can connect a USB device to your computer by inserting its USB plug. The first time you plug a USB device into a particular USB port on your computer, Windows automatically installs a driver for that device. After the driver has been installed, you can disconnect and reconnect the device without performing any additional steps. Before disconnecting a USB storage device, make sure your computer has finished transferring data to that device. Click the Safely Remove Hardware and Eject Media icon in the Windows notification area to remove the device before disconnecting.

5. What happens if we insert the USB device for the first time in the computer?

Complete the following text with the suitable words in the box!

Yellow Cake

lngredients:

•  cups of flour
• 2 eggs
• 1 tbsp leveled baking powder
•  cups of white sugar
•  tsp of salt
• 1 cup of milk at room 1)____
•  cup shortening or unsalted butter
• 1 tsp vanilla 2) _____

Methods:

Take out and 10) ____ on wire rack.

Read the text and answer the question!

When you cook fish with sauce, you might not even notice the smell. However, sometimes you are unlucky and you can smell the odor. If you want to get rid the odor, there are two easy tips

1. Before cooking, squeeze lemon juice over the fish. It is the simple way even though sometimes . it will leave the fish with a citrusy flavor. Lemon juice will neutralize the odor.
2. Before cooking, soak the fish in milk for 20 minutes.
   The protein in the milk binds with the compounds that cause the fishy odor, in essence extracting if from the fish. It will leave sweet-smelling, brighter flesh with clean flavor. This is the best way.

What can be used to get rid of the fishy odor?

Choose the correct answer by crossing A, B, C, D, or E!

White Chocolate Sorbet

For 8-1 0 portions

Ingredients:

• 2 gelatin sheets
• 2 cups water
•  cup granulated sugar
•  cup honey
• 150 g finely chopped white chocolate
•  cup milk
• Berries and lemon balm to garnish, optional

Instructions:

Soak the gelatin sheets in plenty of cold water. Boil the water, sugar, and honey. Remove the pan from the heat and add the finely chopped chocolate. Let it sit for 5 minutes. Add the gelatin and stir. Allow to cool. Once cooled, add the milk to the sorbet mixture and pour into an ice creem maker. Let freeze for 40 minutes. Decorate with fresh berries and lemon balm (optional).

Taken from: The Big Book of Desserls and Pastries: Dozens of Recipes for Gounnet Sweets and Sauces

After we remove the pan from the heat, we should ...

How to Clean an Aquarium

Materials needed:

• Algae scraper
• Filter media
• Brush
• Water siphon
• Bleach and lime remover

Directions:

1. Clean inside the aquarium with algae scraper.
2. Soak extra dirty decorations, rocks, and plants in bleach.
3. Use a water siphon to vacuum away debris in gravel
4. Use an aquarium safe lime cleaner on the outside.
5. Wait two weeks and clean filter. Clean the filter monthly, either by replacing the media or rinsing it. While you are at it, soak your fishnets in a disinfectant solution to keep them clean· and soft. With regular care,your aquarium will look beautiful all the time.

Source: https://www.thesprucepets.com/

What should you use to clean the inside of aquarium?

Choose the correct answer by crossing A, B, C, D, or E!

If you want to move a plant, you should be careful when you pull it. The following are some steps to plant bare root plants.

1. Select the location. You should consider the need of light and water.
2. Dig a hole that is two times as wide and deep as the mass of the roots.
3. Fill the hole with water and let drain.
4. Fill bottom of the hole with small mound of existing soil. Then spread roots evenly over the soil mound.
5. Place plant in the hole with root flare level with soil surface.
6. Cover the roots with existing soil. Then fill spaces between, roots up to root flare.
7. Create a soil berm around perimeter of hole to retain water.
8. Water generously and only add compost to fertilize.

What should you consider when you choose the location?

Answer the following questions clearly and correctly!

    First of all, put on your boots, your coat, and your gardening gloves. Then collect a fork a rake, a disposal basket, a dibber and the seed potatoes from the shed. Clear away the winter weeds from the patch using a fork. Pulf them out. Throw them in the basket. Dig hard with the fork, turning over the soil. Rake the patch until the soil is fine. Make evenly spaced holes in the patch with the dibber and drop a seed potato in each hole. Rake the soil over the top.

Identify the equipment or tools used in the process and their functions!

Materials needed:

• 5 gallons container with drainage holes
• Soil
• Tomato seedlings
• Tomato stake
• Mulch
• Water
• Trowel

Methods:

1. Fill your container three-quarters full of soil. Break up the soil so it is loose. Make a hole in the center. 
2. Carefully, remove the seedling from its container. Set it in the hole. Arrange the soil around the plant so it is supported.
3. You may need to stake your plant. Put the stake in the soil near the seedling. Make sure the bottom of the stake hits the bottom of the container.
4. Add mulch around the seedling. Then water the plant thoroughly.

Taken from: Cool Tomatoes from Garden to
Table: How to Plant, Grow, and
Prepare Tomatoes

Why should we break up the soil?